and scored at 3¼ & 4¼ :
I put a die and centered it on my 4¼ score mark. I used a sticky note to keep it in place:
I ran it through my Cuttlebug twice: one from each direction, until the score mark.
The best way to do it is to put the upper plate (C in my example) only on the part that needs to be cut:
And now on the other side:
When done - the shape should look like this (cut from 2 sides, with a strip not cut):
I cut the same shape twice, and another 2 shapes - a little smaller:
Adhered to my card:
And on the other side:
If you have any question or comment - please reply...
Thanks for visiting :-)